+36706332328

MitaPoint Barrel Tuner for the exact match

A barrel tuner or barrel weight is used to compensate for the wave motion of the barrel during shooting. With precise adjustment, the dispersion pattern is reduced by half, and sometimes by a third, when shooting at long distances.
Of course, you need to get the right stable ammunition. But even with cheaper ammunition, you can shoot groups that are comparable to competition ammunition. Therefore, the price of a barrel tuner quickly pays for itself for those who shoot a lot.

The tube moves 1mm with a full turn. There are 50 divisions on the tuner. One in five divisions numbered. The numbered divisions provide a 0.1mm statement. For fine adjustment, the uncovered settings allow 0.02mm setting. That is, the position of the tube can be set very precisely.

The adapter part of the barrel tuner is manufactured after the order, because the thread at the end of the barrel can vary from weapon to weapon. Therefore, the delivery time is longer than for other products in stock. This is usually an extra week, maximum 2 weeks. We will clarify after the order. When ordering, be sure to write what thread is on the end of the rifle barrel, because we manufacture the adapter for this.

ATTENTION: The delivery time for this product is approximately 2 weeks.

Read the detailed description on the blog (Precise shot, accurate hit – MitaPoint BarrelPipe Tuner) before ordering!

180

More details

What is the barrel tuner for?

During shooting, the increasing pressure in the tube, the path of which is blocked by the bullet still in the tube, starts a small wave as it moves forward in the tube, and this wave ends in a small whiplash-like wave as the bullet leaves the tube. This tiny harmonic wave is just enough to increase the scattering pattern by several cm at greater distances.

Adjustability:

  • number of divisions: 50
  • numbering: 0-9
  • full turn: 1mm
  • one division: 0.02mm
  • main (numbered) divisions: 0.1mm

Who do I recommend the tube tuner to?

Mainly for sports shooters or those who want to shoot very accurately at long distances. Of course, the shooter's skills are also important for accuracy, but technique will no longer be the bottleneck. 🙂

If you want to shoot accurately with cheaper or more easily available ammunition, this way you can save on much more expensive ammunition. That means you can shoot MUCH more for the same cost. :-). Moreover, the price of the barrel tuner also pays for itself.
For example, I tested it (in 22LR caliber) with SK Standard Plus ammunition, which costs a third of the Eley Tenex. And there is no difference in dispersion. I also tested it with CCI Standard ammunition, which costs almost a quarter of the Eley Tenex. So, with 22LR ammunition, the price of the barrel tuner pays for itself in about 500 shots. With larger calibers, much sooner.

How it works

The barrel tuner adapter must be screwed onto the end of the rifle barrel. You have to pull it. Due to the threading, the indicator line on the adapter may not be at top dead center.
The pipe weight, which is screwed onto the adapter, can be adjusted without rattling against a spring. For the first adjustment, it is worth setting the adapter and the front of the pipe weight diagonally and start shooting there.

Purchase details

The adapter part of the barrel tuner is manufactured after the order, because the thread at the end of the barrel can vary from weapon to weapon. Therefore, the delivery time is longer than for other products in stock. This is usually an extra week, maximum 2 weeks. We will clarify after the order. When ordering, be sure to write what thread is on the end of the rifle barrel, because we manufacture the adapter for this.

Additional information

Weight 316 g
Dimensions 48 × 42 × 42 mm
Delivery size (mm)

Manufacturer

Thread size

, , ,

The new product launch price is the biggest discount we can offer.
This price is specifically for the introduction of new models and applies to the stock of the first introductory product.
No time limit applies only to the stock of the first order.
If you get this product later, it will probably be more expensive.
We cannot offer resellers a better price than this because it includes a minimum profit margin.
Coupons do not apply to these products either because in many cases they would be sold below the purchase price.
Please place your order with this in mind.

Dear customer.
The treatment of preferential prices has changed slightly since the introduction of the Price Regulation. The amount of the discount must be compared to the lowest price of the last 30 days and displayed as a percentage.
Unfortunately, the constantly changing EURO and USD exchange rates have made this a bit difficult. For goods purchased from abroad, the current HUF price is linked to the current exchange rate. Thus, in the case of a low exchange rate within 30 days, the normal price at that moment may be lower than the discounted price if the exchange rate is high at that moment.
Therefore, any discounted price shown next to the price will always be the discounted price next to the current exchange rate, but may vary significantly in percentage terms from the best price of the last 30 days. Unfortunately it can be even higher and in this case we cannot indicate that the current price is discounted. Even if the discount compared to the current normal price would be significant.

The promotion is valid for the number of items in stock indicated next to the product, with no time limit.

Black Friday akció a megjelölt kedvezményes termékekre vonatkozik.

Installing a scope on an air rifle

Some practical advice for home/home mounting of scopes.

Scope inspection, packaging

Preparation, inspection and packaging of scopes for delivery.

Reviews

Be the first to review “MitaPoint Barrel Tuner for the exact match”

Your email address will not be published. Required fields are marked *