Detailed description

Discoveryopt DGPR Z – premium adjustable-height riflescope mount in 6061-T6 aluminium

The Discoveryopt DGPR Z is a sturdy yet lightweight two-piece riflescope mount with adjustable height, CNC-machined from aerospace-grade 6061-T6 aluminium. Its base size is 30 mm, and the supplied metal reducer inserts also make it suitable for scopes with a 25.4 mm (1 inch) tube. The metal inserts give a more even clamping force than older plastic inserts and help keep the scope accurately centred over the long term.

Adjustable height

The scope centre height is adjustable in toothed steps, measured from the rail surface, between approx. 1.2 and 1.4 inches (approx. 30–36 mm). This helps in two ways: you can match the scope height to your own eye position, and with larger objective lenses there is enough room between the objective bell and the rifle (rail, magazine).

For the objective size, the total outer diameter of the bell (including lens caps) is what counts, not the nominal lens size. At the highest setting, plan for an outer diameter of up to approx. 65 mm; at the lowest setting, up to approx. 56 mm. If the rifle has a magazine or another protruding part, check the clearance before mounting.

Important: this mount cannot be tilted. The height is adjusted in toothed steps, and the difference between two neighbouring steps is too large to fine-tune the scope's inclination or elevation with it. Always set both rings to the same step: if they sit at different heights, the tube may be deformed when the screws are tightened. If you need extra elevation reserve (inclination) for longer distances, use a canted rail.

Rigid, precise fit

The CNC machining of the rings gives the tube an even seat. The caps are clamped by screws, so the hold is secure while still being gentle on the tube. The metal inserts also provide a stable, even clamp on 25.4 mm scopes.

Compatibility

  • Rail — made for 20 mm Picatinny (MIL-STD-1913) rails.
  • Tube — 30 mm; 25.4 mm (1 inch) with the metal reducer inserts.

Technical data in brief

  • Material — 6061-T6 aluminium, CNC-machined
  • Type — two-piece, universal, adjustable-height mount
  • Tube diameter — 30 mm / 25.4 mm (1 inch)
  • Mounting rail — Picatinny
  • Scope centre height — adjustable in steps, approx. 1.2–1.4" (approx. 30–36 mm)

Mounting tips

  • Alignment — make sure the two rings are aligned on the same axis, and set both rings to the same height step, because different settings may deform the tube.
  • Even tightening — tighten the screws in a cross pattern, in small steps, so the tube is not subjected to one-sided load.
  • Torque — tighten the ring cap screws (the ones clamping the tube) to 19–20 in-lbs (approx. 2.1–2.3 Nm) and the base screws (the ones fixing the mount to the rail) to 24–25 in-lbs (approx. 2.7–2.8 Nm), using a torque wrench.
  • Thread locker — a medium-strength (blue) thread locker is recommended on the base screws.

What is it suitable for?

  • Air rifles (PCP and spring-piston) — the height adjustment helps to match the scope to your eye. On spring-piston air rifles, which recoil in two directions, a properly tightened, stable mount is especially important.
  • .22 LR sport and hunting rifles — practical, easily tuned eye height and objective clearance at distances of 25–100 m.
  • General sport shooting, hobby — if you use one scope on several rifles with different setups, the adjustable design allows quick changeovers.

When to choose something else

In competition precision shooting a fixed mount is the usual choice, as it has fewer moving parts. For high-recoil centrefire calibres, a fixed steel mount is likewise the better option. The DGPR Z is useful where flexibility matters: one mount can cover several platforms and optics. Compared with adjustable mounts that use plastic inserts, the metal inserts give a more stable clamp.

Who do we recommend it for?

The Discoveryopt DGPR Z is for those who need a stable hold and an adjustable eye height at the same time: owners of PCP and spring-piston air rifles and .22 LR rifles, and anyone who uses one scope on several rifles. If you need a canted rail for long distances, or you shoot a high-recoil calibre, a fixed mount is the better choice. Not sure about the height, the objective size or the rail type? Write to us with your rifle and scope model, and we will help you choose the right solution.

Recommended accessories

Alternatives

Similar products

Reviews

Be the first to review!

Write a review

Thanks for a detailed, helpful review!
Reviews are moderated before publishing.